Machinery Directive; Declaration Of The Manufacturer - CDVI DIGIWAY PLUS DWP 102 Série Manuel D'installation

Table des Matières

Les langues disponibles

INSTALLATION MANUAL

DIGIWAY PLUS

Automatic pedestrian doors fall into the application ﬁ eld of the Machinery Directive (2006/42/CE).

1. Prepare the Technical Construction File (which must contain the documents indicated in Annex V of the Machinery Directive) and must

be kept and placed at the disposal of competent national authorities for at least ten years from the date of manufacture of the motorised

door.

2. Draft the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Directive

3. Afﬁ x the CE marking on the power operated door in accordance with point 1.7.3 of Annex I of the Machinery Directive.

The installer must consign to the customer the following documents :

1. Instructions on how to operate and safely use the system.

2. Routine maintenance instructions.

3. Declaration of conformity.

4. Maintenance register.

The operator DIGIWAY type DWPS102xx, DWPD102XX belongs to the Service Class 5 ( 600 cycles a day for 5 years min).

Applications : HEAVY DUTY, for pedestrian accesses to institutional complexes with very intense use.

The Manufacturer

Herewith declares that the automatic operator for swing doors

- constitutes a "partly completed machinery" and it is intended to be incorpored into machinery or to be

assembled with other machinery to constitute a machinery covered by Directive

assembled with other machinery to constitute a machinery covered by Directive 2006/42/CE;

- complies with the following Directives :

- it is not allowed to put the machinery into service until the machinery into which it has to be incorporated or

of which it has to be a component has been found and declarated to be in compliance with the provisions of the

Directive 98/37/EC.

S.Pietro di Feletto, 30/5/2010