toolport 4 m economy Série Mode D'emploi page 23

4 m series
GB
Instructions
Select a flat surface for the tent. Unpack the boxes and check if all listed parts are included.
with a cloth. In colder weather conditions we suggest to bring the roof to room temperature
before installing.
1
Assemble the roof frame by mounting parts 4 and 5 on the pipes (parts 1 and 2).
Use the screws to attach the parts.
2
Lift one side of the tent frame and attach the legs (3). Place the roof (15) onto the frame
and use the bungees (9) to fasten it.
Be sure not to put too much tension on the bungees in order not to make attaching the
other side more difficult.
3
Attach the legs on the other side. Make sure, that the leg pipes are in vertical position,
to avoid overtention on the endwalls. Use the medium-size ground pegs (7) to fasten the feet
to the ground. Attach the side covers to the pipes (3) using hooks (13).
4
Unfold the side walls (16) and the end walls (17) and attach the side walls to the frame
using the bungees (9). Attach the end walls directly to the roof using the short bungees (10).
Use the short ground pegs (8) to fasten the end walls to the ground.
The guy rope runs from every corner of the tent and is braced to the gound using the
long ground pegs (6).
economy
23