Dirt Devil Infinity V12 eco Mode D'emploi page 29

2 Assembly
Fig. 10
1
Fig. 11
Fig. 12
a
Fig. 13
Danger of injury! Only mount the nozzles if the plug has
been removed from thesocket. The appliance could be
switched on accidentally.
Proceed as follows to fit on the nozzles:
1
1. Switch the appliance off and pull the plug out of the
socket.
2. Remove the nozzle from the telescopic tube (Fig. 10/1).
3. Attach the desired nozzle to the lower end of the tele-
scopic tube (Fig. 10/1) or directly to the handle.
(Fig. 11/1).
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
Our (mini) turbo brush can only be used to vacuum
surfaces that are not sensitive. Do not clean any floors
or objects with the (mini) turbo brush that you would not
clean without a second thought with a conventional
brush. Therefore, do not clean sensitive or polished floor
surfaces with the (mini) turbo brush. Nor should you
clean furniture, sensitive carpets, upholstery, covers, or
any material with a sensitive texture with the (mini) turbo
brush. Otherwise material damage might occur. If in
1
doubt, refrain from using the (mini) turbo brush. In every
instance observe the instructions for care and cleaning of
*
the respective manufacturer.
NOTE:
If you want to use the mini turbo brush, you must first
attach the supplied adapter (Fig. 12/*) on the telescopic
tube or on the handle (Fig. 12/1). This is described in
detail in the instruction sheet for the mini turbo brush or
the pet hair turbo brush.
4. If possible, store nozzles no longer in use on the acces-
sory bracket as shown.
- Insert the 2-in-1 combi nozzle into the accessory
- Push the crevice nozzle onto the accessory bracket
b
5. Keep the other nozzles safe and inaccessible to chil-
dren.
WARNING:
ATTENTION:
ATTENTION:
bracket (Fig. 13/a).
and fold it down until you feel and hear it snap into
place (Fig. 13/b).
29