6. Pass the closing strap through the dust upper bag's mouth that has a device for fixing it to the hook. Hang the bag
on the hook. Place the open end of the filter bag on the drum's edge. Once done, adjust the closing strap so that the
tensioner is in the closing system's teeth. Press the tensioner's handle to lock the bag in place. Make sure the closing
strap is in the manifold's throat before locking the tensioner.
Position the lower bag like the upper bag but from the manifold's lower part without suspending it (Fig. 8).
7. Secure the flexible tube to the connector to mount to the escape at the outfeed of the suction fan (Fig. 9). Or
disconnect this flexible tube and connect the wood machine's one using the appropriate flexible tube and the
corresponding closing strap.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
11