Use; Controls - Atag WS90 PM Série Notice D'utilisation

USE

Controls

EN 6
Starting the exhaust system
1. Touch the on/off key.
▷ The exhaust system starts at setting 1.
▷ The display shows the exhaust setting.
2. Change the exhaust setting with the plus (+) key or minus (-) key.
▷ You can choose setting 1, 2, 3 or an intensive setting.
The intensive setting
You can temporarily switch the extractor hood to the intensive setting,
for example, to remove the odour quickly if something has burned.
1. In setting 3, touch the plus (+) key again.
▷ Setting 4 flashes on the display. The extractor hood switches to
its highest setting for 6 minutes, and then switches back to the
original setting.
▷ Touch the minus (-) key to switch off the intensive setting before
the 6 minutes have elapsed.
Stop the exhaust system
1. Touch the on/off key.
▷ The exhaust system stops.
Switching on the timer
1. Start the exhaust system and choose setting 1, 2 or 3.
2. Touch the timer key.
▷ The exhaust setting flashes on the display. The hood switches off
automatically after 15 minutes.
▷ Touch the timer key again to switch off the timer before the
15 minutes have elapsed.
▷ You cannot use the timer with the intensive setting.
Switching the lighting on and off
1. Touch the lighting key.
▷ The lighting comes on.
2. Press the lighting key again.
▷ The lighting goes off.