Operating - Tecno-gaz DISTILLER Manuel De L'utilisateur

ENGLISH
Verify that the upper cover is closed (G) and place the distiller
on a flat surface, solid and safe, line up the tank with the
draining of the distiller (D), putting the filter-holder container
between them as shown (E)
Connect the electrical feeling cable to the electric network (M)
and the connection of the upper cover for the feeding of the
engine (N).
The process is completely automatic, at the end of the
distillation, water is finished, the machine switches off
automatically.
In order to stop the machine before the distillation of all the
water it is necessary to disconnect the electric feeling. After
about 1 hour of working the process starts and after about 7
hours you'll have 4 liters of distilled water. The water obtained
can be kept in a container preferably in refrigerator. Before
consuming you'd better shake the container.
AT THE BEGINNING THE MACHINE IS READY TO
DISTILL, THEN EVERY TIME YOU WANT DO START A
PROCESS OF DISTILLATION IT IS NECESSARY TO
REARM THE MACHINE
BUTTON ( R)

OPERATING

PRESSING
FIG 4
FIG 2
THE PROBER
FIG 3
20