VOX Amplification AGA30 Manuel D'utilisation page 8

AGA30 Owner's manual
10. TREBLE knob
11. EFFECTS knob
12. ANTI-FEEDBACK knob
8
8. CLIP indicator
This indicator lights up if the volume level of the connected musical instrument is too high. Clipping
could distort the sound and reduce the sound fidelity. To avoid clipping, use the GAIN switch and
VOLUME knob to adjust the volume level.
9. BASS knob
This knob adjusts the tone of the low-frequency region.
NOTE:Turning the knob toward the right will boost the low-frequency region, but excessive boosting
could cause acoustic feedback (a whine or howl.)
This knob adjusts the tone of the high-frequency region.
NOTE:Turning the knob toward the right will boost the high-frequency region, but excessive boosting
could cause acoustic feedback (a whine or howl.)
This knob adjusts the depth of the reverb or chorus effect.
This knob enables you to reduce the amount of feedback that is caused when the output of the ampli-
fier is picked up via a guitar or microphone.
Set the control knob so that the amount of feedback will be minimal.
Turning the control knob clockwise will move the cut point to a higher frequency range. Turning the
control knob all the way counter-clockwise will turn off the anti-feedback effect.
Turn this control off if you hear no feedback.