AGA30 Owner's manual
Rear Panel
10
1
1. POWER switch
When you turn this power switch on, the POWER indicator on the front panel will light up.
2. AC power connector
Connect the supplied power cable here.
3. FOOT SW jack
Connect an optional VFS2 dual foot switch here. For more information on using the foot switch, please
refer to "Controlling the Amplifier with VFS2 Dual Foot Switch" on page 12.
NOTE:You must connect or disconnect the foot switch while the power is off. Malfunctions or damage
may occur if you connect or disconnect the foot switch while the power is on.
4. TUNER/DIRECT OUT jack
Connect your tuner or PA system to this jack. It will output the unmodified sound of the instrument
that's connected to the GUITAR/MIC jack or GUITAR jack.
2
3
4
5