VOX Amplification AGA30 Manuel D'utilisation page 12

AGA30 Owner's manual
Controlling the Amplifier with VFS2 Dual Foot Switch
Using an optional VFS2 dual foot switch connected to the FOOT SW jack on the rear panel of the AGA30
enables you to use your foot to turn the Effect Bypass on or off (disabling or enabling the reverb and chorus
effects), and switch All Mute on and off.
Switching Effect Bypass on and off (Switch 1)
If you use switch 1 of the VFS2 to turn effect bypass on, all effects will be bypassed regardless of how the front
panel EFFECTS knob is set. Effect bypass will be cleared when you press switch 1 once again or use the front
panel EFFECTS knob.
Switching All Mute on and off (Switch 2)
The VFS2 Switch 2 works in the same way as the ALL MUTE switch on the front panel (see "ALL MUTE
switch" on page 9). Pressing the Switch 2 will switch All Mute on or off.
12
NOTE:You must connect or disconnect the foot switch while the power is off. Malfunctions or damage
may occur if you connect or disconnect the foot switch while the power is on.