Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Repairs that go beyond the usual
cleaning and care process need to
be performed by a qualified repair
service.
•
Always make sure that the cord
does not hang loosely from the
table or working surface or within
the reach of children. Further-
more, it must not be in reach or
get in contact with hot parts of the
device, other sources of heat or
sharp edges.
•
Never dip the power cord, stand
mixer or power plug into water or
other liquids since this may cause
fire, electric shocks or other injuries.
•
Do not put the stand mixer into
operation, if the power cord or
power plug are damaged. Let a
qualified repair service exchange it
for you.
BEFORE THE INITIAL START-UP
Before the initial start-up, clean all parts of the stand mixer with soapy water and
let them dry.
18
•
Do not put any metallic accessory
parts into the microwave.
•
Always use only one accessory part
at a time.
•
The stand mixer automatically
switches off if it overheats. In this
case, let it cool down for 15 minutes
before switching it on again.
•
The stand mixer automatically swit-
ches off if the engine head is lifted
or the power supply is not suffi-
cient. In order to take the stand
mixer back into operation, set the
speed to OFF and start it again.
•
Children or persons with reduced
physical, sensory or mental abilities
may only use the stand mixer if
they are supervised.
Publicité
Table des Matières
