7. Teaching-in on MAX! Components
In order to enable communication bet ween MA X!
Components, the devices have to be taught-in to one
another.
• Start by switching the teach-in partner (e.g. the MAX!
Cube) toteach-in mode.
• To activate teach-in mode, press and hold down one of
the buttons on the MAX! Eco Switch for at least 3 sec-
onds. The LED flashes in teach-in mode.
• Successful teaching-in of the MAX! Eco Switch is
confirmed by the LED lighting up once. If you do
not teach-in any devices, the teach-in procedure
deactivates automatically after 30 s.
The MAX! Eco Switch communicates with the MAX!
Components only centrally via the MAX! Cube. If this
central interface fails, MAX! Components can no longer
receive commands from the MAX! Eco Switch.
The MAX! Eco Switch can be reset to the initial state
manually. Restoring the initial state deletes all settings and
information about taught-in devices.
• First remove the batteries from the battery compart-
ment.
18
8. Teach-out/Reset