IDEAL AP35 Mode D'emploi page 39

Cleaning and Maintenance
CAUTION: Unplug the mains plug prior to cleaning and maintenance work!
Cleaning the device housing (every two weeks)
1. Open the fi lter cover.
> To open the filter cover, take hold of it at
the top on the right and left-hand sides.
2. Clean the filter surface with a dust extractor
as set to the lowest setting.
3. Pull out the pre-filter by the hand grip.
Wash it in warm water and allow to dry.
> A wet or moist filter can result in smells and
in malfunctioning.
4. Mount the filter and re-fit the filter cover.
> Make sure you correctly fit the filter into the grooves (CLICK).
CLICK
KLICK
39