CLEANING AND MAINTENANCE - R eplacing the oil or liquid fat
The quality of the oil or liquid fat deteriorates every time you use the deep fryer. For this reason you will need
to replace the oil or liquid fat at regular intervals. Topping up the oil or liquid fat will not improve the quality.
Use good quality oil or liquid fat.
ATTENTION: Never using solid fats (blocks)
ATTENTION: Only use oil or liquid fats specifically suitable for frying
Replace the oil or liquid fat when;
•
it becomes darker in colour,
•
it becomes thicker in consistency,
•
small air bubbles are seen that take a long time to disappear; in new, fresh fat the air bubbles are large
and they also disappear rapidly,
•
the fried food has an unpleasant or strange taste or smell,
•
the appliance emits more smoke than usual.
CLEANING AND MAINTENANCE - Replacing the filter
The disposable filter is intended to reduce the smell of frying when using the appliance. They become less
effective over the course of time, and for this reason it has to be replaced at regular intervals.
1. Press the lip on top of the ventilation cover and remove the ventilation cover.
2. Remove the filter.
3. Fit new filter (with the black filter at the top).
4. Fit the ventilation cover.
THE ENVIRONMENT
•
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
•
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
36
Instruction manual