Sitting; Folding | Transporting | Stowing; Backrest Adjustment; Cleaning | Maintenance - Drive DeVilbiss Healthcare NITRO Mode D'emploi

EN

Sitting

Place the rollator on an even and solid surface. Then ap-
ply the brakes. The rollator must be stable and may not
slip. Only sit upright; do not lean backwards. Seated posi-
tion permitted only as shown and against the direction of
movement (pic. 11).

Folding | Transporting | Stowing

To fold up the rollator, use the handle to pull the seat sec-
tion upwards (pic. 13).
Then push the sides of the rollator together until the fold-
ing guard audibly clicks into place (pic. 14).
14
Drive Medical GmbH & Co. KG | As per: 21.04.2021 | Errors and alterations excepted
NOT PERMITTED!

Backrest adjustment

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
• Check the condition of the tires regularly. They are
„fail-safe", meaning that you do not have to check air
pressure or fill them with air. Always check the tires for
tears or other damage, however.
Instructions for use NITRO