Bourgini 11.3128.00.00 Mode D'emploi page 28

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
be wiped with a damp cloth rather than any hard
substance. If the inner wall of the oven is dirty,
the user can clean it with a soft lotion rather
than rough and abrasive lotion.
It is recommended to use pure water or distilled
water for the steam function. If tap water is used
for a long time, there will be scale on the inner
walls of the oven.
The water tank (5) needs to be checked
regularly. If necessary, the water tank (5) needs
to be taken out horizontally. The water tank (5)
needs to be cleaned and wiped gently with a soft
cloth. After wiping or cleaning the inner wall,
the water tank (5) needs to be put back in its
original place.
After cooking is completed, the residual water in
the water holder needs to be removed.
The sealing surface of the oven door (7) needs
to be cleaned frequently and wiped with a soft
dry cloth.
When the steam oven is not used for a long time,
the power plug needs to be unplugged and the
insides need to be cleaned and the steam oven
needs to be placed in a dry environment without
corrosive gas.
The product must be repaired by a professional
maintenance staff in case of any failure. Do not
disassemble and overhaul it by yourself.
Do not clean the glass of oven door (7) with a
rough detergent or sharp metal scraper because
it may lead to the smashing of the glass.
The power cord shall be unplugged when
cleaning the cavity or replacing the bulb.
Do not use the steam cleaner
CLEANING OF THE HEATING ELEMENT (11)
(See fig. 5)
The heating element (11) is located on the inside of
the oven and is positioned at the top.
If it gets dirty due to splashing food, it can easily be
cleaned.
The heating element (11) is designed so that it can
be detached from the top of the oven.
To release the heating element (11), the support of
the heating element (11) must be pulled. You must
pull this towards you so that the heating element
(11) can be removed.
This can be cleaned with a damp cloth.
After cleaning the heating element (11), it can be
folded back again.
CLEANING OF THE WATER TRAY (8)
There is a water tray (8) under the steam oven. This
collects the water that remains after steaming.
The water tray (8) can be slid out of the oven and
can be emptied and cleaned in this way.
28

Publicité

Table des Matières
loading

Table des Matières