Control Panel; Function Description - Bourgini 11.3128.00.00 Mode D'emploi

EN
automatically from the product and drain or pour
away from the bottom water holder after each use
of the oven for cooking operation.
• It is forbidden to heat the food in a sealed container
because the sealed container is possible to explode,
such as, sealed bottles, boxed milk, etc. It is
necessary to tear the package and drop the food
into special products for heating.
• Please put the oven on a counter with a height of at
least 85 cm.
• Choose the right accessories depending on the type
of food that you want to cook:
2. Steam tray
The steam pan (2) must first be positioned in the
oven. This pan can be used in combination with the
steam function. The holes in the steam pan ensures
that the steam can move through the entire oven.
3. Oven rack
For heating up pizzas and baking half-baked rolls.
Also suitable for oven dishes, grilling meat and fish,
and raclette dishes. The rack can be positioned at 2
different heights.
4. Oven tray
Put an oven dish or baking tray on the oven tray.
When using the steam tray and oven rack, the oven
tray is used as a drip tray. The oven tray can be
covered with aluminium foil to make it easier to
clean.
• DIY (Do It Yourself) stands for programs the user
can program themselves to their preference.
• During preprogrammed functions time and
temperature are not adjustable.

CONTROL PANEL

(See fig. 3):
NR. SYMBOL FUNCTION + DESCRIPTION
12 Oven lamp/child lock key:
1.Touch it once, oven lamp is
ON; touch it again, oven lamp
is OFF;
2.Oven lamp will be ON for
three minutes after the work
is over;
3.Oven lamp will be ON for
three minutes when the oven
door is opened;
4.The key turns to child lock
by holding it down for three
seconds; in the standby mode,
hold it down once, it is locked;
press it again to unlock.
13 Setting key: preset and time-
delay
1. In standby mode, press this
key to enter the start timer
mode and preset icon is ON;
2. After any program working
ends, Press this key to enter
the time-delay function and the
time-delay icon is ON.
14 BACK key
Press this key to return to the
previous setting and press it
again to return again.
15 Selection key (Reverse
function):
1. Select regular function
modes and specific DIY working
modes;
2. Adjust the time;
3. Adjust the temperature.
Confirm each step with the
ENTER key
20