Product Components - Hach TitraLab KF1000 Série Manuel D'utilisation De Base

Instrument connections
Figure 2 shows the connections on the rear panel of the instrument. Use the USB port on the side of
the instrument for the USB applications key supplied with the instrument. Use the USB port on the
rear of the instrument to connect to a printer, mouse, keyboard or a USB hub.
Figure 2 Instrument connections
1 24 V external power supply port
2 Sensor 1 port
3 Sensor 2 port

Product components

Make sure that all components have been received. Refer to the packing list in the box. If any items
are missing or damaged, contact the manufacturer or a sales representative immediately.
Figure 3 Contents of the instrument box
1 Instrument
2 Sample stopper
6 English
4 Not used
5 Not used
6 Serial port
3 Sensor storage tubes (3x)
4 Power supply
7 USB port
8 Ethernet port
5 Power cord