Table Des Matières; Getting Started And Basic Operation - Canon Speedlite 430EX II Mode D'emploi

Getting Started and
Basic Operation
Installing the Batteries ............................................ 8
Attaching and Detaching the Flash......................... 9
Turning on the Power Switch................................ 10
Fully Automatic Flash Shooting ............................. 11
Using E-TTL II and E-TTL Autoflash in the
Shooting Modes.................................................... 12
Cautions for firing continuous flashes
To avoid overheating and degrading the flash
head, do not fire more than 20 continuous
flashes. After 20 continuous flashes, allow a rest
time of at least 10 min.
If you fire more than 20 continuous flashes and
then fire more flashes in short intervals, the
inner overheating prevention function may be
activated to make the recycling time about 8 to
20 sec. If this occurs, allow a rest time of about
15 min. and the flash will then return to normal.
1
7