Q: Manual Flash (M) - Canon Speedlite 430EX II Mode D'emploi

q: Manual Flash
You can set the flash output from 1/64 power to 1/1 full power in 1/3-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure. Setting the camera's shooting mode to
<W> or <q> is recommended.
Flash Output Display
The manual flash output value will change as shown below when the
flash output is decreased or increased.
(Example)
1/1 -0.3
1/1
1/2 +0.7
1
Press the <D> button so
that <q> is displayed.
2
Set the flash output.
Figures for decreased flash output →
1/1 -0.7
1/2
1/2 +0.3
← Figures for increased flash output
Press the <8> button.
The flash output blinks.
Press the <9> button to set the
flash output, then press the <8>
button.
Press the shutter button halfway to
see the effective flash range
displayed.
1/2 -0.3
1/4 +0.7
1/2 -0.7
1/4
1/4 +0.3
•••
•••
19