Mauboussin John le Pilote Mode D'emploi page 9

1) Setting the time
Pull the crown out to the 2
p.19). Turn the crown to set hour and minute
hands. When the crown is pushed back to the
position 0, small second hand begins to run.
2) Setting the date
Pull the crown out to the 1
p.19) and turn to set the date. Then push
back to the position 0.
3) Using the chronograph
The 6 hour chrono display counts seconds.
The 9 hour chrono display counts minutes.
The 3 hour chrono display counts hours
up to 24 hours. The big blue needle has
the function of a second hand and not a
chronograph.
position (sketch
nd
position (sketch
st
14
To start the chronograph press button A.
To stop the chronograph press button A.
4) Chronograph reset
Press button B to reset chronograph to
the zero position.
5) Watch components
Your watch has been elaborated with steel. It
is fitted with a sapphire glass.
6) Water resistance
Your watch is water resistant to 10 ATM.
Warning, the guarantee is applicable only
if the crown is correctly screwed back to
position 0 (sketch p.19).
15