Tools Required; Installation; Preparation; Coffee Grounds Disposal Function - Jura X8 Mode D'emploi

Coffee grounds disposal / drip drain set X8/X6

1 Tools required

U
Drill
U
File
U
In addition for coffee grounds disposal
function
U
60 mm core drill bit
U
70 mm core drill bit
U
In addition for drip drain
U
10 mm drill bit
U
Core drill bit of at least 35 mm

2 Installation

Preparation

T Switch off coffee machine.
T Unplug from the power socket.
T Remove the water tank.
T Lock the aroma preservation cover of the
bean container.
T Remove drip tray and coffee grounds
container.

Coffee grounds disposal function

T Drill hole in underside of drip tray (with
60 mm core drill bit).
T Deburr drilled hole with a file.
T Fit coffee grounds funnel in drip tray.
6
T Drill hole for coffee grounds disposal in
tabletop (70 mm core drill bit). For position,
see illustration on last page of these
instructions for use.
T Carefully lay the coffee machine on its back.
T Remove round cover.
T Insert tube section and tighten.
T Place coffee machine and tube section in
tabletop hole and/or install drip drain (see
following section).

Drip drain

T Drill hole for valve in drip tray (10 mm drill
bit).
T Deburr drilled hole with a file.