T8S Tonematch® Mixer - Bose T4S ToneMatch Guide De Démarrage Rapide

Control and Connection Panels
T8S ToneMatch® Mixer
Control Panel
Figure 3. T8S Control Panel
q
w
e
r
t
y
u
i
q INPUT SIGNAL/CLIP LEDs (1–8): Displays the input signal status in color:
Green: Indicates the presence of an input signal
Red: Indicates input source clipping
w TRIM CONTROLS (1–8): Adjusts the input sensitivity for the respective channel.
e DISPLAY: Provides function menus and system information.
r EDITING CONTROLS: These three rotary/push-button controls allow you to select or adjust items/values
appearing on the display.
t CH EDIT BUTTONS (1–8): Selects the channel you want to modify.
y FX MUTE BUTTONS (1–8): Bypasses the Mod, Delay, and Reverb effects on the selected channel.
u VOLUME CONTROLS (1–8): Adjusts the volume level for the respective channel.
i MUTE BUTTONS (1–8): Silences the audio output for the respective channel.
o MASTER VOLUME CONTROL: Adjusts the overall output level.
a HEADPHONE VOLUME CONTROL: Adjust the volume level of the headphone output.
s STEREO OUTPUT METER: Allows you to visually measure your output level.
d ROTARY SELECTOR: Allows access to both global and channel-related parameters, which are adjusted
using the editing controls.
f PHANTOM POWER SWITCH: Applies +48V power to Input Channels 1–8. A red LED indicates that phantom
power is on.
CAUTION: Set the Master volume control to its minimum position before using the phantom power
switch or powering on/off any microphones that use phantom power.
g HEADPHONE JACK: For use with headphones only, with a minimum impedance of 24 Ω.
6 - English
f
d
s
a
o
g