Power Switch - Bose T4S ToneMatch Guide De Démarrage Rapide

Connection Panel
Figure 2. T4S Connection Panel
q
o
q POWER SWITCH: Turns the mixer on or off.
w USB 2.0 TYPE-B: A USB interface that allows you to connect the mixer to your computer.
e USB 2.0 TYPE-A: A USB interface that allows you to stream audio from your flash drive.
r ANALOG L/R OUTPUT: Main analog output. Accepts 1/4-inch TRS balanced or TS unbalanced cables.
t AUX OUTPUT: Two user-definable analog outputs. Can be configured for a pre-fader, post-EQ, and effects,
or post-fader output. Accepts 1/4-inch TRS balanced cables.
y AUX IN: Analog Input Channels 5/6. Accepts 1/4-inch TRS balanced or TS unbalanced cables for line-level
inputs. Can be used for stereo input signals.
u INPUTS 1–4: Analog Input Channels 1–4. Accepts XLR balanced cables for microphones or 1/4-inch TRS
balanced or TS unbalanced cables for high-impedance inputs, such as guitars.
i DIGITAL MAIN OUTPUT L: Connect digitally in stereo to two L1® Model 1S/II systems.
Note: Only used in stereo with Digital Main Output R.
o POWER PORT/DIGITAL MAIN OUTPUT R: A digital output used by the L1 Model 1S/II system. Delivers
power to the T4S mixer from the L1 Model 1S/II power stand. Can also deliver power from an AC outlet via a
ToneMatch power supply (not included with the T4S). Accepts the included ToneMatch® cable.
CAUTION: Although the ToneMatch port accepts a standard RJ-45 connector, do NOT connect the
T4S to a computer or phone network.
w e
USB AUDIO
M
i
r
MONO
Control and Connection Panels
t y
u
English - 5