Important Safety Warning - Kicker KSC350 Manuel D'utilisation

Haut-parleurs coaxiaux ks
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY WARNING

Prolonged continuous operation of an amplifi er, speaker, or subwoofer in a distorted, clipped or over-
powered manner can cause your audio system to overheat, possibly catching fi re and resulting in serious
damage to your components and/or vehicle. Amplifi ers require up to 4 inches (10cm) open ventilation.
Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and
any surface.
KS COAXIAL SPEAKERS
The KICKER KS speakers offer an excellent upgrade to your vehicle's factory sound system, delivering
great full-range sound at an amazing value! Whether dropping the KS speakers in a factory location or
customizing your install, their high-effi ciency design means less power is needed to play your music, while
our use of advanced materials and construction techniques ensures optimal performance for years to
come.
Connect wiring to terminals
+
+
+
2
2017 KS Coax Rev E.indd 2
2017 KS Coax Rev E.indd 2
KS COAXIAL AND 3-WAY
SPEAKERS OWNER'S MANUAL
MODEL:
KSC350 | KSC40 | KSC460 | KSC4100
KSC5250 | KSC60 | KSC650 | KSC680
KSC690 | KSC6930
WIRING
We recommend using 16 gauge (or
larger) wire. The KS Speakers are rated
at 4 ohms and work with any source unit
or amplifi er designed to operate at a 4
ohm load. Make sure your source
unit or amplifi er is rated for 4 ohm
operation.
-
Two KS Speakers wired in
parallel to a single channel
Total Impedance: 2 ohms
-
-
source unit / amplifi er
Two KS Speakers wired in
series to a single channel
Total Impedance: 8 ohms
+
-
+
-
+
-
11/8/2016 2:41:03 PM
11/8/2016 2:41:03 PM

Publicité

Table des Matières
loading

Table des Matières