Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: tritontools.com/en-GB/Support
Address:
Powerbox
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
•
Store this tool carefully in a secure, dry place out of the reach of children
Troubleshooting
Problem
No function when On/Off Trigger Switch (10) is operated
Sander pulls to the side during operation
Belt sander running despite not touching the On/Off Trigger
Switch
GB
10
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
•
Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE),
with household waste
•
Contact your local waste disposal authority for information on the correct way to dispose
of power tools
Possible cause
No power
Defective On/Off Trigger Switch
Off-centre sanding belt
Loose sanding belt
Lock-On Button (9) activated
Solution
Check power supply
Replace the On/Off Trigger at an authorised Triton service
centre
Adjust the belt Tracking Adjustment Knob (7) to align the
belt. If problem persists, refit the belt as instructed in 'Fitting
a sanding belt'
Ensure the Belt Tension Lever (15) is securely closed. If
problem persists, refit the belt as instructed in 'Fitting a
sanding belt'
To stop the machine, squeeze and release the On/Off
Trigger Switch