Westfalia 323 410 391 101 Instructions De Montage page 12

Connecting the power supply
15. Connect the grey 13-pin connector (Fig. 1/x) with the vehicle's cable harness and lock it into
place.
16. Open the fuse box in the luggage compartment, front left, and insert the fuses as follows:
Fuse block 20 A into port FA 11
-
Fuse block 15 A into port FA 9
-
Special information concerning vehicles with parking distance control (PDC)
On vehicles with PDC it is possible to deactivate the PDC for trailer operation using a button that
is located on the instrument board. There is no automatic turn-off integrated.
17. Only for 13-pin trailer socket:
Using the 3-pin connector for the constant plus extension kit (Fig. 1/7), the "Charging lead"
function can be retrofitted.
The charge lead extension kit is available in specialist shops under the Westfalia part no.
300 028 300 113.
Note
The constant plus line on pin 9 of the socket is integrated into the cable set.
Checking the correct operation
18. Reconnect the negative terminal of the vehicle's battery.
19. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
20. Secure all cables using cable ties.
21. Reattach any parts that were removed for the installation.
12 WESTFALIA Automotive GmbH
Electrical system for towing hitch
323 410 391 101 - 001 - 47/07
Installation instructions:
Land Rover Freelander