Sharp GX-CD1200W Mode D'emploi page 11

(Continued)
RECORD
Dubbing from tape to tape
1
Set the FUNCTION switch to TAPE.
2
Load a prerecorded cassette into the TAPE 2 cassette com-
partment. Insert a blank tape into the TAPE 1 cassette com-
partment.
3
Set the DUBBING SPEED switch to NORMAL for normal-
speed dubbing, HIGH for high-speed dubbing.
4
Press the PAUSE button of TAPE 1.
5
Press the RECORD button of TAPE 1, which also engages
the PLAY button.
6
Choose either side A(1) or side B(2) of TAPE 2 with the
DIRECTION switch.
7
Press the PLAY button of TAPE 2.
The PAUSE button of TAPE 1 will be released automati-
cally and dubbing from TAPE 2 to TAPE 1 will begin (Syn-
chronous dubbing start).
Notes:
Do not change the setting of the DUBBING SPEED switch
during dubbing.
Do not connect anything to the MIX MIC socket.
PLAY PAUSE PLAY
1
2
3
4
Note:
E-10
DUBBING SPEED
FUNCTION
TAPE 1 TAPE 2
DIRECTION
Erasing recorded tapes
Load the tape to be erased into the TAPE 1 cassette com-
partment.
Set the FUNCTION switch to TAPE.
Set the DUBBING SPEED switch to HIGH or NORMAL.
Check to ensure that TAPE 2 is out of operation.
Press the RECORD button of TAPE 1 to begin erasing.
Do not connect anything to the MIX MIC socket.