Technical Data; Safety Notes - Protector WA-11 Mode D'emploi

WA-11 | ENGLISH
2. Sensor electrodes are dirty > clean
the sensor electrodes, e.g. with fine
sandpaper or a glass fibre eraser.
3. If 1. and 2. do not solve the pro-
blem, there may be a defect. In this
case, please contact our service
department. You will find the contact
details at www.protector24.de.

TECHNICAL DATA

Voltage: 230V 50Hz AC; 1W
Switching capacity: max. 16A,
3680W; ϕ1
Frequency: 2.4GHz; < 10mW
NOTES
Exposure to strong static, electric or
high-frequency fields (discharges,
mobile phones, radio equipment,
mobile phones, microwaves) may
impair the function of the device.
Cleaning and care
Disconnect mains operated units
from the mains (pull out the plug)
before cleaning. The surface of the
housing can be cleaned with a soft
cloth moistened with soapy water.
Do not use abrasive cleaners or che-
micals. Loosen dust deposits on ven-
tilation slots only with a brush and, if
necessary, vacuum with a hoover. Do
not hold the suction nozzle directly
against the appliance.

SAFETY NOTES

The warranty will be null and void in
case of damages arising from violati-
ons of these operating instructions.
We are not liable for consequential
damages!
We accept no liability for material
damages or injuries arising from
inappropriate use or violation of the
safety instructions. In such cases all
warranty claims are null and void!
For reasons of safety and licensing
(CE), unauthorised conversion and
/or modification of the product is
prohibited.
18