Quickly Attenuating The Sound; Changing The Sound And Display Settings; Menu - Sony CDX-M630 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-M630:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Quickly attenuating the
sound
(With the rotary commander or the card
remote commander)
Press (ATT).
"ATT on" appears in the display momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
18
Changing the sound and
display settings

— Menu

The following items can be set:
Set Up
• Clock (page 8)
• Beep — to turn the beeps on or off.
• AUX-A (page 21) — to turn the AUX source
display on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select "Normal" to use the rotary commander
at the factory-set position.
– Select "Reverse" when you mount the rotary
commander on the right side of the steering
column.
Display
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
• SA (Spectrum Analyzer) (page 21) — to
change the display pattern of the sound signal
level.
• DEMO (Demonstration) — to turn the
Demonstration mode on or off.
– Select "on" to activate DEMO display.
– Select "off" to deactivate the Demonstration
mode.
• Dimmer — to change the brightness of the
display.
– Select "Auto" to dim the display only when
you turn the lights on.
– Select "on" to dim the display.
– Select "off" to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognizable
because of the unit's installation position.
• BlackOut — to blacken the display, while the
operation mode is on.
– Select "on" to black out the indications.
The indications will disappear, but the unit
will react if you press any button.
– Select "off" to brighten the display.
• A.Scroll (Auto Scroll)
– Select "on" to scroll all automatically
displayed names exceeding 12 characters.
– When Auto scroll is set to off and the disc/
track/album is changed, the disc/track/album
name or ID3 tag does not scroll.

Publicité

Table des Matières
loading

Table des Matières