Nicols XMOV 2 Manuel D'utilisation page 13

2) Press the "SETUP", enter the menu to setting the sensitive of the sound active
mode "×××"
3) Press the "UP" or "DOWN" to set up the sensitive value 0-31. It will be more
sensitive when the value is bigger.
Local information for the program version——
1) Press the "MODE", enter the menu to check the local information for the
program version "8. Info"
2) Press the "SETUP", enter the preview menu for the program version
information of the local "display"、"motor"、"dimmer"
3) Press the "UP" or "DOWN", it will show "display"、"motor"、"dimmer"version
information
 "display"——display board program version No.
 "motor"——electrical control panel program Version No.
 "dimmer"——dimming control panel program version No.
Recover factory reset——
1) Press the "MODE", recover factory reset menu"9.Default"
2) Press the "SETUP", recover factory reset menu "No"/"Yes"
3) Press the "UP" or "DOWN" to choose the recover factory reset."No" no function
"Yes" all of the menu will return back to the factory reset.
DMX Working mode 1 : 12 channels
Channel
CH1 Pan
CH2 Pan fine
CH3 Tilt
CH4 Tilt fine
CH5 Pan /Tilt Speed
CH6 Dimmer
CH7 Red
CH8 Green
CH9 Blue
CH10 Strobe
9.Default
Value
(0-255)
(0-255)
(0-255)
(0-255)
(0-255)
(0-255)
(0-255)
(0-255)
(0-255)
(0-255)
12-
8. Info
Function
X axis
X axis fine tuning
Y axis
Y axis fine tuning
X/Y axis speed
Master dimming
Red dimming
Green dimming
Blue dimming
0-20HZ strobe