Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Fig. D
Assemble Crossmember and Spray Handle
Storage Hook (Fig. E)
Your pressure washer is not fully assembled in the carton.
1. To assemble the crossmember
frame handle
24
, align the four screw tabs
the back of the crossmember
four slots
30
in the frame handle
crossmember
28
onto the frame handle
2. Insert the four retaining screws
handle
24
and use a screwdriver to fully tighten the
screws. Ensure the crossmember
the frame handle
24
3. To assemble the spray handle storage hook
frame handle
24
, align the two screw tabs
back of the spray handle storage hook
slots
34
in the frame handle and place the spray handle
storage hook
32
onto the frame handle
4. Insert the two retaining screws
handle
24
and use a screwdriver to fully tighten the
screws. Ensure the spray handle storage hook is fully
secured to the frame handle.
Fig. E
32
33
28
High Pressure Hose Storage Hook (Fig. F)
Your pressure washer is not fully assembled in the carton.
1. To assemble the high pressure hose storage hook
to the crossmember
the hook so it will slide between the retaining slots
on the rear of the crossmember
24
25
27
26
7
28
to the
28
with the with the
24
and place the
24
31
through the frame
28
is fully secured to
.
32
33
32
with the two
24
.
31
through the frame
29
30
31
30
34
28
, squeeze the detent end
28
.
2. Release the pressure hose storage hook
detents
3. Press the high pressure hose storage hook
locking detents
until it clicks into place.
Fig. F
29
on
.
Power Cord Storage (Fig. G)
Your pressure washer is not fully assembled in the carton.
1. Insert power cord storage retaining hooks
retaining holes
to the
on the
2. Rotate power cord storage upward and past the detent.
The power cord storage will click firmly into place.
Fig. G
24
Attaching Spray Wand (Fig. H)
1. To connect the spray wand
insert the end of the spray wand inside the spray handle
and turn the spray wand clockwise until its firmly in
working position.
Fig. H
35
36
of
37
36
to rest securely in the retaining slots
on the rear of the crossmember
38
28
37
36
38
40
as shown in Fig. G.
39
2
to the spray handle
2
English
35
allowing the
37
.
onto the
35
28
35
39
into two
40
3
,
3
5
Publicité
Table des Matières
