Cleaning And Storage - Tribest Personal Blender II PB-410 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Keep your Tribest Personal Blender ready for use on the kitchen counter.
• When it is not in use, keep it unplugged.
• Store blade assembly in a convenient safe place out of children's reach as you would do with
sharp knives.
• All parts are hand washable (water temperature should not exceed 104°F.) To simplify
cleaning, rinse blending cups and blade assemblies im mediately after each use so
food does not dry on them. To clean the motor base, make sure it is unplugged, then wash
the outside surface with a damp, soft cloth or sponge that has been rinsed in a mild solution
of liquid detergent and warm water. Do not place the motor base in water.
• When you wash the Blade Assemblies by hand, do it carefully as the blades are very sharp.
Avoid leaving them in soapy water where they may disappear from sight.
• The Blending Cups are made of a strong and clear BPA-free polymer plastic,
co polyester, with high impact resistance. Its smooth surface will look new for years when
properly maintained. Keep a sponge handy as you work and wipe spills from base. Do not
use abrasive cleaners on base.
• The rubber feet on the bottom of the motor base will keep the Blender from moving on most
work surfaces. Clean the rubber feet regularly. When the rubber feet are dirty, the machine
could move on the counter.
• NEVER allow water to enter the main body of the machine.
• NEVER use harsh chemicals, such as bleach, to remove food stains.
• NEVER drop any of the components. Our warranty does not cover accidental damage.

CLEANING AND STORAGE

EN
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Personal blender ii pb-420Personal blender ii pb-430

Table des Matières