Shizuoka Seiki VAL6 KBE5S Manuel D'utilisation page 4

ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
■ KBE5L
The unit is packaged without having the safety guard and the visor parts assembled.
Prior to assembly, check the heater and supplied parts for possible shipping damage.
If any damage is found, do not proceed further and immediately notify the dealer from
whom you purchased the heater.
Be sure to assemble the safety guard and the visor properly before the unit is used.
Follow the instruction below to assemble the safety guard and the visor in the correct order.
Visor
Safety guard
To help prevent accidents, never use the unit without the safety guard.
2
Before assembling, make sure 6 screws and visor are included in package.
No.1
No.1
At first the safety guard must
be slid under the hook.
CAUTION
Observation
Behind view
Closeup
No.1
No.1
Safety
guard
Hook
No.2
No.2
Then the safety guard must be fastened
with the screws provided on both sides.
Visor
No.3
No.3
Finally, the visor must be fastened with
the 2 screws provided on both sides.
No.2
No.2