Shizuoka Seiki VAL6 KBE5S Manuel D'utilisation page 18

7-1. Fuse
1
Unscrew two screws of burner cover and
remove the burner cover.
2
Unscrew the screw cap of fuse holder and
take out the fuse.
Screw
Unscrew two screws and take
burner cover off
7-2. Nozzle
• Place the burner assembly taken out within the reach of two fuel hoses.
1
Remove three nuts from burner attachment
bolts and take the burner assembly off.
Unscrew three nuts and take the burner off
Burner assembly
16
Observations
Nut
3
Replace with a new one.
4
Put the screw cap back into fuse holder.
5
Put the burner cover back with two screws
removed.
Screw cap
Open a screw cap and take out a fuse
2
Remove the nozzle using the nozzle
wrench provided as standard parts.
Replace with a new nozzle.
Loosen
3
Tighten the nozzle using the nozzle wrench
until the nozzle is fixed.
4
Put the burner assembly back with three
nuts removed.
Fuse
Check whether
the fuse is blown
out
Nozzle