Eneo VMC-17LCD-HP Mode D'emploi page 16

• Language menu
80x04 60Hz
English
Français
Deutsch
Español
Italiano
• Misc (miscellaneous) menu
80x04 60Hz
Input
Reset
Previous
• Exit is to exit the menu
5.2 Video (CVBS/S.VIDEO) Mode Menu Operations
• VIDEO menu
PAL 50Hz
Contrast
Brightness
Sharpness
Tint
Color
Under Scan
Previous
English sets the OSD language of the menu in English.
Français sets the OSD language of the menu in French.
Deutsch sets the OSD language of the menu in German.
Español sets the OSD language of the menu in Spanish
Italiano sets the OSD language of the menu in Italian.
Input selects between the PC, composite (BNC) or Y/C (4 pin S-video) to be displayed.
Reset sets the monitor original factory setting.
Previous is return to Main menu
Pushing the MENU button will bring up the Menu shown above.
Select item which you want to adjust using the , ,
To exit the menu, push the MENU button.
(This process store the new settings which you'd adjusted automatically.)
Contrast is used to adjust the contrast of the screen image.
Brightness is used to adjust the brightness of the screen image.
Sharpness sets the desired sharpening enhancement to the picture.
Tint adjusts all the colors on the screen, but is most noticeable to the eye in reds and
yellows, and is also usually set for pleasing face tones. (Appears in NTSC mode only).
Color is used to minutely adjust colour.
Under Scan adjusts the image size.
Previous is return to Main menu.
6
buttons.