AERMEC KTL M Manuel D'utilisation Et D'installation page 25

K T L P
K T L M
26
KTLP
combined with:
FCX 17 - 22 - 32 - 42 - 50
FCX 24 - 34 - 44 - 54
FCS 22 - 32 - 42 - 50
- connect the bracket to the two hooks on the upper part of the
side;
- use the screws to fix the bracket into the two lower holes.
KTLP
combined with:
FCX 62 - 82 - 102
FCX 64 - 84
FCS 62 - 82
- position the bracket on the side;
- drill 3 holes on the side tracing the bracket holes (see diagram).
KTLM
combined with:
FCX 17 - 22 - 32 - 42 - 50
FCS 22 - 32 - 42 - 50
- connect the racket to the two hooks on the upper part of the
side;
- drill 2 holes on the side tracing the two lower holes on the brac-
ket (see diagram).
- use the screws to block it into the two lower holes of the brac-
ket;
KTLM
combined with:
FCX 62 - 82 - 102
FCS 62 - 82
- use the screws to fix the bracket into the lower holes.
- carry out a hole on the side tracing the upper left hole of the
bracket (see diagram).