AERMEC KTL M Manuel D'utilisation Et D'installation page 17

INFRARED REMOTE CONTROL
DISPLAY
1 - DISPLAY OF WORKING MODE
2 - DISPLAY OF TEMPERATURE (°C)
- temperature set
or
- temperature detected by the remote control room temperature
probe, ("ROOM"
3 - DISPLAY OF VENTILATION SPEED
(minimum, medium, maximum and automatic)
4 - DISPLAY OF "I FEEL" FUNCTION ACTIVE
5 - DISPLAY OF "ROOM" FUNCTION ACTIVE
In this case the temperature shown in (2) is that detected by the
remote control room temperature probe.
6 - DISPLAY OF NOCTURNAL WELLBEING "SLEEP" FUNCTION
ACTIVE
7 - CLOCK
8 - DISPLAY OF TIMER ACTIVE
9 - DISPLAY OF SIGNAL TRANSMISSION
I.R. RECEIVER
The I.R. receiver also includes the lights indicating the set working
mode, the light showing operation and the button which switches the
fan coil on/off in AUTOMATIC mode even without the remote con-
trol.
1 - POWER LIGHT
The POWER light indicates that the fan coil unit is working.
2 - AUTO BUTTON
By pressing the button on the receiver while the fan coil unit
is switched off, you automatically switch it on (temperature set at
22°C and automatic ventilation speed).
By pressing the on the receiver when the fan coil unit is wor-
king, you switch it off.
3 - "COOL" COOLING LIGHT
The COOL light shows that the fan coil unit is working in cool
mode.
When the light fl ashes and there is a sound it means that the recei-
ver is receiving a signal from the remote control.
4 - "HEAT" HEATING LIGHT
The HEAT light means that the fan coil unit is working in heating
mode.
When the light fl ashes and there is a sound it means that the recei-
ver is receiving a signal from the remote control.
5 - I.R.RECEIVER
Receives the signal from the remote control.
18
function active).
1
8
2
3
1
2
3
9
8
7
6
5
4
4 5