Working Modes; Automatic Mode; "Dehumidification" Mode - AERMEC KTL M Manuel D'utilisation Et D'installation

WORKING MODES

2 3
MODE
2
1
"VENTILATION ONLY" MODE
• Mode is activated with the
temperature. This is recommended in plant using a valve.
• Press the button to set the minimum, medium and maximum ventilation speed or automa-
tic management.
You can choose ventilation speeds manually:
Minimum speed:
Medium speed:
Maximum speed:
When automatic management
is fixed at maximum speed.
Both the COOL and HEAT lights on the I.R. receiver are off.
.
2
MODE
2
1
22
"AUTOMATIC" MODE
• The water in the plant must be at a temperature suitable for the chosen mode.
• Either heating or cooling modes will be automatically activated depending on the set tempera-
ture.
• Using the key, select automatic mode, the
MODE
• Use the / keys to set the temperature until the desired values appear on the display.
• Press the button to set the minimum, medium and maximum ventilation speed or auto-
matic management.
You can choose ventilation speeds manually:
Minimum speed:
Medium speed:
Maximum speed:
By choosing automatic management
to the difference in set temperature and room temperature
Automatic management is only active in heating, cooling and automatic modes; minimum wor-
king time between one speed and the other is 30 seconds.
key and will enable ventilation only, regardless of the set
MODE
, is chosen with "VENTILATION ONLY" mode set, ventilation

"DEHUMIDIFICATION" MODE

• Using the key, select the dehumidifi cation working mode in, the
MODE
the display.
• Use the / keys to set the temperature until the desired values show on the display.
• The fan coil unit continues to work at minimum speed regardless of the selected ventilation
speed.
• The water in the plant must be at a suitable temperature.
symbol will appear on the display.
ventilation speed is automatically defined according
2
MODE
1
symbol appears on