Bose Lifestyle SoundTouch 535 Guide D'utilisation page 27

Problem
Intermittent bass
(Lifestyle
®
SoundTouch 135
™
systems)
Sound is impaired
by a loud hum or
buzz, which may
be electrical in
nature
Radio does not
work
FM sound is
distorted
Picture is blurry
when viewing 3D
content
Sound is distorted • Ensure the audio input cable is connected and not damaged.
No sound from a
connected device
No TV picture, but
audio is heard
A connected de-
vice not respond-
ing consistently to
remote com-
mands
Intermittent audio
dropouts heard
on coaxial digital
audio inputs
What to do
• Check that the status indicator on the Acoustimass
amber. See page 25.
• If the soundbar status indicator is blinking amber:
— Connect the Acoustimass module to AC (mains) power (The
status indicator glows amber).
— Press the Setup button on the control console. Select "Recon-
nect Acoustimass". Follow the on-screen instructions.
— Move system away from potential interference, such as a wireless
router, cordless phone, television, microwave, etc.
Contact Bose Customer Service to determine if and how
®
other electrical devices in the room create unwanted signals, and to
obtain possible remedies.
• Connect antennas.
• Move AM antenna at least 20 inches (50 cm) from the control con-
sole and Acoustimass module.
• Adjust antenna position.
• Ensure the AM antenna is upright.
• Move antennas farther from control console, TV, or other electronic
equipment.
• Select another station.
• Adjust antenna position.
• Fully extend the FM antenna.
• Ensure your 3D glasses are powered on (if necessary).
• Change the 3D system option to a different setting.
• Ensure the soundbar is not blocking the IR sensor on the TV.
• Reduce the volume output level from any external devices con-
nected to the control console.
• (Lifestyle SoundTouch
®
from the system.
• Check the connections.
• Do not make coaxial or optical audio connections to the same input
on the control console.
• Power on the device.
• Refer to the owner's manual that came with the device.
• Ensure the TV video input selection is correct for the
video source.
• Ensure cables are securely connected.
Connect the included external IR emitter to the control console. For
guidance, press the Setup button on the control console. Select de-
vice options and follow on-screen instructions.
Contact Bose Customer Service to request a composite video cable
for the coaxial digital audio connection.
Care and Maintenance
135 systems) Remove all protective films
™
module is solid
®
English - 27