If you only set WATER FLOW TEMP. to YES, or only set ROOM TEMP. to YES, The following pages will be displayed.
only WATER FLOW TEMP. YES
If you set WATER FLOW TEMP. and ROOM TEMP. to YES, meanwhile set DOUBLE ZONE to NON or YES, the following
pages will be displayed.
Homepage (zone 1)
In this case, the setting value of zone 1 is T1S,the setting value of zone 2 is TS(The corresponding TIS2 is calculated according
to the climate related curves.)
If you set DOUBLE ZONE to YES and set ROOM TEMP. to NON, meanwhile set WATER FLOW TEMP. to YES or NON,the
following pages will be displayed.
Homepage (zone 1)
In this case, the setting value of zone 1 is T1S,the setting value of zone 2 is T1S2.
If you set DOUBLE ZONE and ROOM TEMP. to YES, meanwhile set WATER FLOW TEMP. to YES or NON,the following page
will be displayed.
Homepage (zone 1)
In this case, the setting value of zone 1 is T1S,the setting value of zone 1 is TS (The corresponding TIS2 is calculated according
to the climate related curves.)
only ROOM TEMP. YES
◄
2
Addition page (zone 2)
(Double zone is effective)
◄
2
Addition page (zone 2)
◄
2
Addition page (zone 2)
(Double zone is effective)
48