Introduction; Safety Instructions; Important Safety Instructions; Before You Begin - Thermador Professional PH Série Manuel D'installation

Masquer les pouces Voir aussi pour Professional PH Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction

This manual provides the proper installation instructions for
two styles of Thermador, PH Series Professional
Hoods:
Five 27"-depth models, with widths of 30", 36", 42", 48",
and 54". This model series features brushed stainless-
steel canopy with halogen lamps and heat lamps.
Three 24"-depth models, with widths of 30", 36", and
48". This model series features brushed stainless-steel
canopy with halogen lamps.

Safety Instructions

Important Safety Instructions

READ AND SAVE THESE INSTRUCTIONS
APPROVED FOR ALL RESIDENTIAL APPLIANCES
FOR RESIDENTIAL USE ONLY

Before you Begin

IMPORTANT: Save these Instructions for the Local Gas
Inspector's use.
INSTALLER: Please leave these Instructions with this unit
for the owner.
OWNER: Please retain these instructions for future
reference.
WARNING:
If the information in this manual is not followed
exactly, fire or shock may result causing
property damage or personal injury.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manuals. Improper installation, service or
maintenance can cause injury or property
damage. Refer to this manual for guidance. All
other servicing should be done by a qualified
technician.
Unit is heavy and requires at least two people or proper
equipment to move.
All hoods require the choice of an Integral Blower
(VTN630C and VTN1030C), Inline Blowers (VTI610D and
®
Wall
VTI1010D), or a Remote Blower (VTR630D, VTR1030D,
and VTR1330E). All blower models are sold separately.
All Hood models are rated for 120 VAC, using a 30 Amp
circuit breaker.
Hidden surfaces may have sharp edges. Use caution when
reaching behind or under appliance.
This appliance complies with one or more of the following
Standards:
UL 858, Standard for the Safety of Household Electric
Ranges
UL 923, Standard for the Safety of Microwave Cooking
Appliances
UL 507, Standard for the Safety of Electrical Fans
ANSI Z21.1- American National Standard for
Household Cooking Gas Appliances
CAN/CSA-C22.2 No. 113, Fans and Ventilators
CAN/CSA-C22.2 No. 61, Household Cooking Ranges
It is the responsibility of the owner and installer to
determine if additional requirements and/or standards
apply to specific installations.
SAFETY WARNING:
Turn off power circuit at service panel and lock
out panel before wiring this appliance.
Requirement: 120 VAC, 60 Hz 30 A.
WARNING:
To reduce the risk of fire, use only metal
ductwork.
English 1

Publicité

Table des Matières
loading

Table des Matières