Elite Volare Mag Force Elastogel Mode D'emploi page 15

bicycle before every hometrainer.
•
The pressure feet are made of soft antislip
material and could leave rubber marks on the
floor during use.
• If the quick release is not compatible with the
bushings of the stand, replace it with the one sup-
plied (M).
ADVISE FOR THE USE
•
Suggested pressure of the rear tire: 7-8 atmos-
pheres for racing wheels; 3.5-4 atmospheres for
MTB wheels. For particular cases follow the
pressure suggested by the tire manufacturer.
•
For less tyre wear and better grip on the roller,
it is advisable to use tires of 23 mm width and
wider rigid casing.
•
Slick tyres (even for MTB bicycles) are sugge-
sted to reduce the noise level and vibrations and to
improve the grip of the tyre on the roller.
•
We suggest to use a steel headed quick release
hub.
•
Before each training session, clean the bicycle
tyre with water or alcohol.
•
If the pin of the quick release supplied protrudes
more than 3 mm from the fixing nut, cut off the
protruding part (fig. 16).
NO
16
OK
EN
15