Technical Data; Ec Declaration Of Conformity - Stanley FatMax FME500 Traduction Des Instructions D'origine

Technical data

Input voltage
V
AC
Power input W
No-load speed min
-1
Impact rate
min
-1
Impact energy per
stroke according to J
EPTA-Procedure 05/2009
Max. drilling capacity
Concrete mm
Steel
mm
Wood mm
Weight kg
Level of sound pressure according to EN 60745:
Sound pressure (L ) 90 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 101 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Hammer drilling into concrete (a ) 16.3 m/s
h, HD
Chiselling (a ) 13.5 m/s , uncertainty (K) 1.5 m/s
2
h, Cheq
FME500 (Type 1)
230
750
0-1050
5,200
1.8
26
13
30
2.3
, uncertainty (K) 1.5 m/s
2 2
2
(Original instructions)

EC declaration of conformity

MACHINERY DIRECTIVE %
FME500
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-6
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical
_ ile and makes this declaration on behalf of Stanley Europe.
Stanley Europe, Egide Walschaertsstraat14-18,
ENGLISH
Kevin Hewitt
Vice-President Global Engineering
2800 Mechelen, Belgium
29/01/2013
7