Setting The Alarm Time; Activate Alarm - Hama RC40 Mode D'emploi

• Press the MODE button:
The hour digits flash. You can set the hours with the + and – buttons.
• Press the MODE button again:
The minute digits flash. You can set the minutes with the + and – buttons.
• Press the MODE button one more time:
The normal time display appears.
Note
If you do not press any buttons for 30 seconds, the clock exits the manual time setting mode. The time/
temperature display appears again and the information has not been updated.
5.3. 12/24-hour display format
Press the + button to switch between the 12 and 24-hour formats. In the 12-hour format, AM or PM appears
before the time.
5.4. Selecting the display for the alarm and calendar
• If you press the MODE button, the time for the alarm is displayed.
• If you press the Calendar button, the date is displayed.

5.5. Setting the alarm time

Setting the alarm
• In the alarm (AL) display, press and hold the MODE button for approx. 3 seconds.
The hour digits flash. You can set the hours with the + and – buttons.
• Press the MODE button again.
The minute digits flash. You can set the minutes with the + and – buttons.
• Press the MODE button again.
The alarm time is set and the

Activate alarm

• Press the ALARM On/Off button to activate/deactivate the alarm function.
Alarm and SNOOZE function
• When the alarm goes off, the corresponding alarm symbol
• Press the ALARM On/Off button to switch off the alarm.
• If you press the SNOOZE/LIGHT (1) button, the alarm stops and the backlighting comes on for 5 seconds.
The display for repeating the alarm (Z
• If the alarm is not switched off, it stops automatically after 10 minutes.
4
icon is displayed.
) flashes. After 4 minutes, the alarm goes off again.
z
flashes.