Setting The Alarm Time - Hama RC100 Mode D'emploi

• Press MODE again (4):
the minute digits are blink and can be set by pressing + or – (3) key.
• Press MODE again (4):
the year digits are blink and can be set by pressing + or – (3) key.
• Press MODE again (4):
the month digits are blink and can be set by pressing + or – (3) key.
• Press MODE again (4):
the date digits is blink and can be set by pressing + or – (3) key.
• Press MODE one last time (4): the normal time display appears.
Note
• If no key is pressed within 30 seconds, it will exit the Manual Time Setting Mode and go back to Time/
Temperature Display without the data update
5.3 12/24-hour display format
Press the + button (2) to switch between the 12 and 24-hour formats. In the 12-hour format, AM or PM
appears before the time.
5.4 Selecting the temperature/Alarm 1/Alarm 2/two-time mode display
• If you press the MODE button (4), the time for ALARM 1 is displayed.
• If you press the MODE button (4) again, the time for ALARM 2 is displayed.
• If you press the MODE button (4) again, the second time is displayed.
• If you press the MODE button (4) again, the temperature is displayed
5.5 Calendar
To change the weekday display from one language to another language, press – key for 3 seconds – the
display will show the current language.
EN = for English
FR = for French
Press & hold the key for 2 seconds to toggle to the other languages.

5.6 Setting the alarm time

Setting Alarm 1:
• In the display for ALARM 1: press and hold the MODE button (4) for approx. 3 seconds.
The hour digits flash. You can set the hours with the + and – buttons (3).
4
GE = for German
SP = for Spain
IT = for Italian