Velleman PEM30DN Mode D'emploi page 2

5. Aligning transmitter with receiver
Use the LEDs to align the transmitter and the receiver. This is easiest if you use an IR viewer or a camera (as most
cameras are IR sensitive, especially the B/W ones).
6. Security Prescriptions
• Make sure that the voltage supply does not exceed the rated value.
• Do not deactivate the device within 50ms after its activation in order to avoid damage.
• Keep the cables well clear of other current-carrying conductors in order to avoid the creation of magnetic fields which
may cause interference.
• Do not install the sensor where it is exposed to fluorescent lamps with rapid-starters or high-frequency starters.
• Do not expose the device to dust, water, dirt or oil and protect it from vibrations or shocks to prevent malfunction.
7. Dimensions = Afmetingen
Bracket / Beugel / Etrier Bracket / Beugel / Etrier+ PEM30DN
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
PEM30DN - 2 - VELLEMAN