Bluetooth Telephone Operations; Select The Bt Phone Mode; Bluetooth Telephone Settings - Clarion NX501E Mode D'emploi Et Manuel D'installation

14. Bluetooth TELEPHONE OPERATIONS

When the connection with your Bluetooth cellular
phone is established, the following functions are
available on this unit:
• Listening to your telephone calls on the car
speakers.
• Answering to an incoming call.
• Making a call using the Ten-Key pad screen.
• Making a call using the Phone Book data in the
selected cellular phone.
• Making a call using the History data of the dialed/
received calls.
Note:
• Some cellular phones may not be able to transfer the
Phone Book data to head unit.
• The Phone Book data transmission may take a long
time. The operations of sending calls are disabled
during the data transmission.
• You can talk with other party by using the internal
microphone. When it is hard to hear for the other party
in accordance with the communication condition or the
used telephone, please use the optional microphone
(RCB-199), and set the Microphone Select setting to
"External". The sound will be improved, but noises
may still be heard depending on the communication
condition.

Select the BT Phone mode

1. Press [MENU] button on Operational Panel to return
to the Main Menu.
2. Touch the [Bluetooth Telephone] key to select the
Bluetooth Telephone mode.
The Telephone screen is displayed.
• When no Bluetooth Telephone connected, the icon
[ ] is displayed at the top of the screen.
• When the connection with a Bluetooth Telephone
has been established, the icon [
indicator are displayed at the top of the screen.

Bluetooth Telephone settings

Confirming Bluetooth Information and setting Pass
Key
You can confirm various information concerning the
Bluetooth Interface features.
1. Touch the [ ] key to display the information on the
screen.
2. Perform setting for the desired item. See the
following sections for detail.
3. When you finish confirming the Bluetooth
information, touch the [
previous screen.
If you want to change the Pass Key setting of this unit,
perform the following steps.
1. Touch the text box of the Pass Key item to display
the Ten-Key Pad screen.
• The factory default setting is "1234".
2. Enter your desired 4-digit PIN number, and then
touch the [ ] key.
] and signal level
] key to return to the
NX501E/NZ501E 39