Safety Information; Intended Use; Maintenance And Service - Bosch GTA 3700 PROFESSIONAL Instructions D'utilisation

GTA3700.book Seite 1 Dienstag, 25. Oktober 2005 10:37 10
MITRE SAW STAND GTA 3700 PROFESSIONAL

Safety Information

WARNING
Read all warning notices and in
struction enclosed with the saw
stand and the power tool to be
mounted. Negligence in complying with
the warning notice and instructions can
lead to electrical shock, fire and/or seri
ous injuries.
Save all warning notices and instruction for fu
ture reference. The term "power tool" used in the
warning notices refers to mains powered tools (with
mains cable) as well as to battery powered tools (with
out mains cable).
Pull the plug from the mains receptacle and/or
remove the battery from the power tool before
making adjustments on the tool or changing tool
accessories. Unintentional switching on of the power
tool is the cause of many accidents.
Assemble the saw stand in the proper manner
before mounting the power tool. Flawless assem
bly is important to prevent the risk of a collapse of the
stand.
Attach the power tool securely to the saw stand
before using it. An unstable power tool on the saw
stand can lead to loss of control.
Place the saw stand on a firm, level and horizon
tal surface. If the saw stand is unstable or wobbles,
the power tool or the work piece cannot be uniformly
and securely guided.
Do not overload the saw stand and do not use it
as a ladder or scaffolding. Overloading or standing
on the saw stand can lead to the upward shifting of the
centre of gravity of the stand and its tipping over.
When working or transporting, ensure that all
bolts and connecting elements are firmly tight
ened. The safety locks on the attachment set for
the power tool must always be locked (see Fig
ure ). Loose connections can lead to instability
B4
and inexact sawing.
Mount and demount the power tool only when it
is in the transport position (see Figure
structions on placing in the transport position,
also see the operating instructions of the respec
tive power tool). Otherwise, the power tool can have
such an unfavourable centre of gravity that it cannot be
held securely.
1 609 929 H97 • (05.11) PS
Article Number 0 601 B10 9..
Operate the power tool when the attachment set
is mounted exclusively on the saw stand. Without
the saw stand, the power tool does not stand securely
on the attachment set and can tip over.
Ensure that long and heavy work pieces do not
affect the equilibrium of the saw stand. Long
and/or heavy work pieces must be supported at the
free end.

Intended Use

The saw stand is intended exclusively for the mounting
of the following Bosch Compound Mitre Saws (as of
1/2006):
– GCM 10
– GCM 10 S
– GCM 10 SD
– GCM 12
– GCM 12 SD
– GKG 24 V
Together with the power tool, the saw stand is intend
ed for the cutting to length of boards and profiles.

Maintenance and Service

Should the tool fail in spite of careful manufacturing
and testing procedures, have the repairs performed by
an authorised customer service location for Bosch
Power Tools.
For inquiries and spare parts ordering, please include
the 10 digit order number on the nameplate of the
tool.
Exploded views and information on spare parts can be
found under: www.bosch pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
Middlesex UB 9 5HJ
Service . . . . . . . . . . . . . . .+44 (0) 18 95/83 87 82
Advice line . . . . . . . . . . . .+44 (0) 18 95/83 87 91
Fax . . . . . . . . . . . . . . . . . . . .+44 (0) 18 95/83 87 89
Ireland
; for in
C
Beaver Distribution Ltd.
Greenhills Road
Tallaght Dublin 24
Service . . . . . . . . . . . . . . . . .+ 353 (0)1/414 9400
Fax . . . . . . . . . . . . . . . . . . . . . .+ 353 (0)1/459 8030
English–1
0 601 B20 ...
0 601 B20 5..
0 601 B22 5..
0 601 B21 0..
0 601 B23 5..
0 601 663 ...