Manufacturer's Warranty - Hilti TE 2000-AVR Mode D'emploi

Trouble or fault
The power tool doesn't start
or cuts out while in operation
and the indicator flashes red.
The power tool runs but the
indicator lights red continu-
ously.
The power tool doesn't start
or cuts out while in operation.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
10

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
*2167141*
Possible cause
Temporary fault (e.g. overheating
or overvoltage).
Advance warning of need for ser-
vicing.
The extension cord is too long
and/or its gauge is inadequate.
2167141
Action to be taken
▶ Switch off, allow the power tool
to cool down or connect it to a
different electric supply.
▶ Have the power tool serviced or
repaired by Hilti Service.
▶ Use an extension cord of an
approved length and/or of
adequate gauge.
English 9