Care And Storage - Beurer MG 200 HD-enjoy Mode D'emploi

• Do not use the massage device for longer than 15 minutes. The massage can be finished at any time by
pressing the ON/OFF button. Please note that on switching off, the Shiatsu massage unit firstly returns to
the starting position at the lowest region of the back. This is indicated by the ON/OFF LED blinking. Never
interrupt the return to the starting position. Once this position is attained, the device switches off.
• If the device is stopped using the MASSAGE button, it also returns to the starting position after 15 minutes
and then switches off.
• DO NOT disconnect the device from the mains supply during operation. Always switch it off only once it
has reached the starting position at the bottom.
• Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device for
longer can over-stimulate the muscles and cause tension instead of relaxation.

8. Care and storage

CLeANING
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent
for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.
• The removable cover is machine-washable at 40 °C. Please follow the cleaning and care symbols
on the label which is sewn into the cover.
• Do not use the device again until it is completely dry.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
Alternatively, you can hang the device in a wardrobe with a coat hanger. To do so, the coat hanger must be
threaded through the hanging loops on the rear side of the device.
CAUTION
• If you use the screw for transport locking, take care when using the device again that it is definitely
removed before switching on.
12